On a turbo car with an intercooler, the piping comes in two halves.
Hot side
The hot side runs from the turbo's compressor outlet to the intercooler. The air in it has just been compressed, so it's hot.
Cold side
The cold side runs from the intercooler to the throttle body. By then the air has been cooled on its way through the intercooler.
Why they're often different sizes
There isn't one right answer. Pipe size, length and the number of bends all change how the setup behaves, and the right call depends on the turbo, the cooler and how much power you're chasing. On the S15 resto we ran a 2.5" hot side and a 3" cold side.
Where the blow-off valve goes
The blow-off valve usually sits on the cold side, close to the throttle body, so it can let pressure out when the throttle shuts.
Keeping it together under boost
Pipe ends need a bead or lip so the silicone joiners can't blow off under boost, and decent clamps to hold them there.
Need one made?
We make boost and intake piping to fit your car. See boost and intake piping or send us the job.

