Enquire
Custom intercooler piping
← All services

Fabrication services

Custom intercooler piping

Hot side, cold side and dose pipes, made to suit your turbo, cooler and throttle body.

Off-the-shelf piping kits are made for a stock layout. Move the cooler, change the turbo or drop in a different engine and they stop lining up. That's where we come in.

We make the whole lot to suit what's in your bay: the hot side from the turbo to the intercooler, the cold side from the cooler to the throttle body, and the dose pipe feeding the turbo. Sizes depend on the setup. On the S15 resto we ran a 2.5" hot side and a 3" cold side, and the MX-5 got a 3" aluminium dose pipe.

We also do BOV deletes, custom intake layouts and intercooler mounts, so the cooler sits where the piping needs it to.

This is for you if

  • You've changed the turbo, cooler or engine and kit piping won't line up
  • You want the intercooler mounted where it suits your car
  • You're building a drift or street car and want the bay done properly

Read moreHot side vs cold side intercooler pipingWhat is a dose pipe?

The parts

Boost and intake piping we've made

2.5" hot side and 3" cold side, S15
Intercooler pipe, R32 GTR
Intercooler pipe, red VL
Cold side to the manifold, S15
Turbo to intercooler, NB MX-5
3" aluminium dose pipe, NB MX-5

How we make it

How we make sure it fits

Every photo here is from a real job. This is how a part goes from a pile of bends to fitted in your bay.

  1. Straight stainless section tacked on the fixture table

    Laid out to suit

    Pipework gets laid out on our fixture table to suit your bay, your turbo and your cooler.

  2. Cooler pipe being test-fitted in the red VL

    Tacked and test-fitted

    Parts get tacked together and test-fitted in the car before anything is fully welded.

  3. Welded bend on S15 cooler piping

    Welded properly

    Once it fits, it gets welded up and finished.

  4. Finished S15 bay with the new piping in

    Fitted to the car

    Then it goes in, and you drive it home.

Enquire

Need boost and intake piping?

Tell us what you drive and what you need made. Photos of the bay help a lot.

How a job works

  1. 01

    Send us the job

    Photos of the bay, what you drive and what you need made.

  2. 02

    We talk it through

    We get back to you, work out what the car needs and give you a price.

  3. 03

    We make it to fit

    We book a time, then build and fit it to your car.

  • You'll deal with Jake directly
  • Based in Douglas Park, NSW

Rather DM?@ondoors.motorsport

Emailondoors.motorsport@gmail.com

Photos

Photos make the biggest difference. When you send this, your email opens with the details filled in. Attach a few photos of the bay before you hit send, or DM them to us on Instagram.

Send us the job